Roomba Clean Button Not Working? Here's What You Can Do! - Wise House (2024)

Are you having trouble with your Roomba’s clean button not working? This can be a frustrating issue to deal with, especially if you rely on your Roomba to keep your home clean. There are several reasons why this problem might occur, ranging from software bugs to faulty batteries. In this article, we’ll explore some of the most common causes of the Roomba clean button not working and provide you with some simple solutions to fix the issue.

One of the most common causes of the Roomba clean button not working is software bugs. These bugs can develop during coding or when the device’s software is updated, and they can cause your Roomba to malfunction. Another possible cause is faulty batteries, which can prevent your Roomba from working correctly. In this article, we’ll explore these and other possible causes of the clean button not working and provide you with some simple fixes to get your Roomba back up and running.

Contents hide

1 Check the Power

3 Check the Battery

4 Clean the Button and Charging Contacts

5 Reboot the Robot

6 Contact Customer Support

7 Reset the Roomba

7.1 Press and Hold the Clean Button

7.2 Release the Clean Button

7.3 Reset the Roomba

8 Conclusion

Check the Power

If your Roomba Clean Button is not working, the first thing you need to check is the power. You should make sure that the battery is charged and that the unit is capable of holding any charge. If you are not sure whether your Roomba is charging, you can try the following:

  • Check that the battery is properly connected to the Roomba.
  • Make sure that the charging contacts on the Roomba and the charging dock are clean and free of any debris.
  • Try charging your Roomba in a different outlet to see if the problem persists.

If your Roomba is still not charging, you may need to replace the battery or the charging dock.

Once you have confirmed that your Roomba is charging properly, you should try resetting and cycling the unit. To do this, press and hold the Clean button for around 15 seconds until you hear a beep go off and a white LED indicator lights up. Then, wait for your device to boot up and try using the Clean button again to see if that fixes the problem.

If the Clean button is still not working, you should try rebooting your Roomba by pressing and holding the Clean button for 20 seconds. After releasing the button, the light ring will show a white clockwise swirl while it reboots. The reboot procedure will be complete when the light ring shuts off.

If none of these steps work, you may need to contact iRobot Customer Care for further assistance.

Clean the Clean Button

If you’re having trouble with your Roomba’s Clean button not working, it could be due to dirt or debris buildup. Here are the steps to clean the Clean button:

Remove the Button Cover

First, you’ll need to remove the button cover. Use a flathead screwdriver to gently pry it off. Be careful not to damage the cover or the button underneath.

Clean the Button and the Cover

Once you’ve removed the cover, you can clean the button and the cover. Use a soft-bristled brush or a cotton swab to gently remove any dirt or debris. You can also use a small amount of rubbing alcohol to clean the button and cover.

Reassemble the Button Cover

After you’ve cleaned the button and cover, it’s time to reassemble the button cover. Simply snap the cover back into place. Make sure it’s securely in place and that the button is working properly.

In addition to cleaning the Clean button, you may also want to check the batteries and power cycle your Roomba. If these steps don’t solve the issue, you may need to contact iRobot customer care for further assistance.

Check the Battery

If your Roomba’s clean button is not working, the first thing to check is the battery. A defective battery can affect the connectivity of the Roomba and cause the clean button to malfunction. To check the battery, follow these steps:

  1. Turn off the Roomba and unplug the charging dock.
  2. Flip the Roomba over and locate the battery compartment.
  3. Remove the battery and inspect it for any signs of damage or corrosion.
  4. If the battery appears to be in good condition, use a multimeter to test its voltage. The voltage should be between 14 and 16 volts. If the voltage is lower than 14 volts, the battery may need to be replaced.

If the battery is the problem, you can purchase a replacement battery from the manufacturer or an authorized dealer. Be sure to follow the manufacturer’s instructions for replacing the battery.

Clean the Button and Charging Contacts

Another reason why the Roomba clean button may not work is that the button and charging contacts may be dirty or worn out. To clean the button and charging contacts, follow these steps:

  1. Turn off the Roomba and unplug the charging dock.
  2. Use a soft, dry cloth to clean the button and charging contacts.
  3. If the button or charging contacts are worn out, you may need to replace them.

Reboot the Robot

If the clean button still doesn’t work after checking the battery and cleaning the button and charging contacts, you can try rebooting the robot. To reboot the robot, follow these steps:

  1. Press and hold the clean button for 20 seconds.
  2. After releasing the button, the light ring will show a white clockwise swirl while it reboots.
  3. The reboot procedure will be complete when the light ring shuts off.

Note that it may take up to a minute and a half for the robot to turn back on after rebooting.

Contact Customer Support

If none of the above solutions work, you may need to contact customer support for further assistance. Be sure to have your Roomba’s model number and serial number on hand when you contact customer support. They may be able to provide additional troubleshooting steps or arrange for a repair or replacement.

Reset the Roomba

If your Roomba clean button is not working, resetting the device can help fix the problem. Here are the steps to reset the Roomba:

Press and Hold the Clean Button

The first step is to press and hold the clean button on your Roomba. Hold the button for around 15 seconds until you hear a beep sound and a white LED indicator lights up. This step is important to ensure that the reset process is initiated.

Release the Clean Button

After holding the clean button for 15 seconds, release the button and wait for your Roomba to reboot. The reboot process can take a few seconds, so be patient and wait for the device to restart.

Reset the Roomba

Once the Roomba has rebooted, it should be reset to its original settings. This means that all data and settings will be removed from the device. You can now try using the clean button to see if the problem has been resolved.

In case the problem persists, you can try other methods like cleaning the charging contacts or contacting iRobot customer care for further assistance.

Resetting your Roomba is a simple process that can help fix the clean button not working problem. It is always a good idea to regularly maintain your Roomba to ensure it functions efficiently.

Conclusion

In conclusion, fixing the Roomba Clean Button Not Working issue can be done in a few simple steps. Here are the solutions that you can try:

  • Check the batteries for defects and replace them if necessary.
  • Power cycle or reset your Roomba.
  • Clean dust out of your Roomba, especially the electrical contacts and filter.
  • Contact customer support for further assistance.
  • If all else fails, you may need to take your Roomba to a repair center to get it fixed.

By following these steps, you can get your Roomba back to working order and keep your floors clean without any hassle. Remember to always check the batteries and keep your Roomba clean to avoid any future issues.

Roomba Clean Button Not Working? Here's What You Can Do! - Wise House (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Aron Pacocha

Last Updated:

Views: 6521

Rating: 4.8 / 5 (48 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Aron Pacocha

Birthday: 1999-08-12

Address: 3808 Moen Corner, Gorczanyport, FL 67364-2074

Phone: +393457723392

Job: Retail Consultant

Hobby: Jewelry making, Cooking, Gaming, Reading, Juggling, Cabaret, Origami

Introduction: My name is Aron Pacocha, I am a happy, tasty, innocent, proud, talented, courageous, magnificent person who loves writing and wants to share my knowledge and understanding with you.